1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 169Get this manual

1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 169

ELECTRICAL STARTING SYSTEM Inspection 1Inspect: Commutator (outer surface) Clean with #600 grit sandpaper CDDirty Hold the
CD (insulation depth) (between commutator segments) Out of specification Scrape mica to proper limitsUse hacksaw blade that
is ground to fitMica undercut0.4 0.8 mm (0.016 0.03 in) 4Measure: Armature coil resistance (insulationcontinuity) Defect(s)
Replace starter motorInspecting steps: Connect the pocket tester for the continuity check CD and the insulation check Measure