1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 368Get this manual

1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 368

COOLING SYSTEM 2Bleed air from the cooling systemAir bleeding steps: Lift up the tail of the machine Remove the bleed bolt
approximately 2500 3000 rpm until the thermostat opens and the coolant circulates (approximatelyminutes)The rear heat exchanger
will be warm to the touch A WARNING To avoid severe injury or death: Make sure the machine is securely supported with suitable
stand Do not exceed 3000 rpmThe machine could unexpectedly move forward if the clutch engages, or drive line damage and excessive
V-belt wear could occur Operate the engine only in well-ventilated area Remove the coolant filler cap and bleed air from