1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 472Get this manual

1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 472

CYLINDER HEAD AND CYLINDER 9Measure: Side clearance (piston rings) Out of specification Replace piston and or ringsUse feeler
with the piston crown Insert the ring into the cylinder, and push it approximately 20 mm (0.8 in) into the cylinderPush the
ring with the piston crown so that the ring is at right angles to the cylinder bore11Measure: End gap (piston rings) Out
of specification l Replace rings as setUse feeler gauge CDEnd gap 0.35 0.55 mm (0.0137 0.0217 in) 0.35 0.55 mm (0.0137 0.0217