1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 515Get this manual

1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 515

_ 3Install: Return springs Hook the spri ng hooks to the projections on the connecting leverand carburetor bodywhile twisting
chamber nozzle Use the adapter (outside diameter fJ6 hose) when attaching the fuel level gauge Loosen the drain screw and
start the engine Place the tube along the seam line of the carburetor body Measure the fuel level with gauge If the fuel
level is incorrect, adjust the fuel level Remove the carburetor Inspect the valve seat and needle valve If either is worn,
replace them both If both are fine, adjust the float height by bending the float tang on the float Recheck the fuel level7-12