1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 28Get this manual

1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 28

I I(0) DRIVE V-BELT IANOSJP DRIVE V-BELT A WARNING When installing the new belt, be sure the V-belt is positionedmm (00.08
on each adjusting bolt CAUTION: As the V-belt wears, adjustment may be necessary to ensure proper clutch performanceWhen
the V-belt position reaches mm (0.12 in), adjust its position by adding spacer onto each adjusting bolt New belt width: 35.0
mm (1.38 in) Belt wear limit width: 32.0 mm (1.26 in) Install the newbelt onto the secondary sheave onlyDo not force thebelt