1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 41Get this manual

1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 41

- I HEADLIGHT BEAM ADJUSTMENT ELECTRICAL IANoSJP HEADLIGHT BEAM ADJUSTMENT 1 Place the machine on level surface2Place the
start the engine and let it idle5Switch on the headlight's high beam and check the height of the projected beam on the wallThe
projection should be at the position marked in step or 12 lower (distance )0 3.0 (10ft 26 mm (1.0 in 7.6 (25 ft 66 mm (2.6
in : Distance : Set range 6Adjust: Headlight beam (vertically) Vertical adjustment Higher Turn the adjusting screw clockwiseLower