1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 127Get this manual

1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 127

CYLINDER HEAD AND CYLINDER 4Check: Piston ring position CAUTION: Make sure that the ring ends are properly fitted around
hand 6Install: Gaskets (cylinder head) Install the gaskets (cylinder head) with its projection facing the COl magneto side
CAUTION: Always use new gaskets7Tighten: Nuts (cylinder head) Bolts (cylinder head) Tightening steps: Temporarily tighten
the cylinder head nuts CD and boltsas follows1st step: Tighten the nuts CDNut (cylinder head): 25 Nm (2.5 kg, 18 ft Ib) 2nd