1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 139Get this manual

1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 139

RECOIL STARTER INSTALLATION 1.Wind: Starter rope (2 turns counterclockwise) (to the sheave drum) 2Install: Starter spring
spring end tothe drive pawl G)Then, hook other end of the return spring to the post on the sheave drum4Install: Drive plate
G) Be sure the cutout portion in the drive plate fits over the post on the drive pawl5Pull about four inches of starter rope
out of the cutout portion in the sheave drum and rotate the sheave drum times counterclockwise to preload the starter spring