1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 146Get this manual

1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 146

_ C_A_R_B_U_RE_T_O_R_S Measurement and adjustment steps: Hold the carburetor upside down Measure the distance between the
or Aeroshell grease #7 A INSTALLATION 1.lnstall: Connecting plate (upper) Connecting plate (lower) 2Tighten: Screw Screw
(connecting plate): Upper: Nm (0.2 kg, 1.4 ft Ib) LOCTITE Lower: 3.4 Nm (0.34 kg, 2.46 ft Ib) LOCTITE If the carburetors
should be separated, care must be taken so that they are put together in place according to the following procedures; Place
the carburetors on surface plate with the intake manifold side down and install the connecting plates while pushing down
the respective carburetors with an even force After tightening the screws (connecting plate), check the throttle lever for