1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 196Get this manual

1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 196

CABLE ROUTING CABLE ROUTING CD Sub wire harness (for models with reverse) (g) Fasten the sub wire harness coupler with the
Route the main switch wire harness under the oil tank breather hose and fuel tank breatherhoseInstall the main switch coupler
behind the instrument panelMake sure that the main switch wire harness is on the inside of the instrument panel screw (away
from the engine)Route the parking brake cable under the oil tank breather hose) Throttle cable Attach the clip to the wire
end (throttle lever side)Oil level switch Variableresistor coupler (for VT500XL models) Pass the starter cable through the
cable guideConnectors of the carburetor switch Speedometer cable Securely fasten the wire harness with metal clamp Under
50 mm (1.97 in) Fasten the speedometer cable and wire harness with plastic clampInstall the clamp as close to the drivebelt