1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 211Get this manual

1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 211

TRACK TENSION ADJUSTMENT 1Place the machine with the right side facing down CAUTION: If the machine is left on its left side
in) 3Adjust: Track deflection Adjustment steps: Place the machine onto suitable stand to raise the track off of the ground
Loosen the rear axle nut G) NOTE:-It is not necessary to remove the cotter pin aStart the engine and rotate the track once
or twiceStop the enginebCheck the track alignment with the slide runnerIf the alignment is incorrect, turn the left and right