1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 317Get this manual

1999-2001 Yamaha Phazer 500 / Venture 500 service manual, Page 317

ELECTRICAL STARTING SYSTEM INSPECTION 1Inspect: Commutator (outer surface) Dirty Clean with #600 grit sandpaper 1Hold the
Out of specification Scrape mica to proper limitsUse hacksaw blade that is ground to fitMica undercut a: 0.6 mm (0.024 in)
4Measure: Armature coil resistance (insulationcontinuity) Defect(s) Replace the starter motorInspecting steps: Connect the
pocket tester for the continuity check and the insulation check Measure the armature coil resistancesArmature coil resistance: