2001 Yamaha Mountain Max Service Manual, Page 8Get this manual

2001 Yamaha Mountain Max Service Manual, Page 8

IMPORTANT INFORMATION GASKETS, OIL SEALS, AND O-RINGS GEN INFO 1All gaskets, seals, and O-rings should be replaced when an
facing outwards(In other words, the stamped letters must be on the side exposed to view When installing oil seals, apply
light coating of lightweight lithium base grease to the seal lipsOil the bearings liberally when installing SCH1100 CAUTION:
Do not use compressed air to spin the bearings dryThis causes damage to the surface of the bearingsSCH1110 CIRCLIPS All circlips
should be inspected carefully before reassemblyAlways replace piston pin clips after one useReplace misshapen circlipsWhen
installing circlip 1, make sure that the sharp edged corner is positioned opposite to the thrust it receivesSee the sectional