2001 Yamaha Mountain Max Service Manual, Page 29Get this manual

2001 Yamaha Mountain Max Service Manual, Page 29

DRIVE V-BELT DRIVE V-BELT INSP ADJ WARNING When installing the new V-belt, make sure that it is positioned from 1.5 mm (0.06
ensure proper clutch performance, the Vbelt position should be adjusted by adding spacer on each adjusting bolt when the
V-belt position reaches 1.5 mm (0.06 in) below the edgeNew belt width: 34.5 mm (1.36 in) Belt wear limit width: 32.5 mm (1.28
in) SCH2420 1Measure: V-belt position a Install the new V-belt onto the secondary sheave onlyDo not force the V-belt between