2001 Yamaha Mountain Max Service Manual, Page 157Get this manual

2001 Yamaha Mountain Max Service Manual, Page 157

CYLINDER HEAD AND CYLINDER 7Eliminate: Score marks and lacquer deposits (from the piston wall) Use 600800 grit wet sandpaper
to the crankshaftThen find the average of the measurementsStandard Cylinder bore (C) Taper (T) Out of round (R) Wear limit
70.50070.520 mm 70.600 mm (2.77562.7764 in) (2.7795 in) 0.05 mm (0.002 in) 0.01 mm (0.0004 in) CMaximum(Maximum of D1 or
D2) (Maximum of D5 or D6)(Maximum of D1, D3 or D5) (Minimum of D2, D4 or D6) If out of specification, replace cylinder, and