2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 22Get this manual

2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 22

COOLING SYSTEM INSP ADJ Air bleeding steps: Lift up the tail of the machine Remove the bleed bolt on the heat exchanger While
air bubbles appearTighten the bleed bolt 2Bleed bolt 2: Nm (0.7 kg, 5.1 ft lb) SCH2260 Install the coolant filler capApply
and lock the parking brakeStart the engine and run it at approximately 2,5003,000 rmin until the coolant circulates (approximatelyminutes)The
rear heat exchanger will be warm to the touch WARNING To avoid severe injury or death: Make sure the machine is securely