2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 73Get this manual

2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 73

REAR SUSPENSION Rear suspension-full rate 1Adjust: Full rate adjuster Adjustment steps: Installation position SCH2920 INSP
Be sure the adjusting bolt ends are set at the same position on each sideSCH2930 While holding the adjusting bolt securely,
tighten the nut 1Nut (shock absorber) 1: 49 Nm (4.9 kg, 35 ft lb) CAUTION: Never allow the adjusting bolt to move while tightening
the nut This model has "Easy adjust" system for the Full rate adjusterThe bolt has teeth on itSo when the bolt is turned,
it rides up and down the bracket The nut has to be loosen first, while the bolt is held in place with wrench Then the bolt