2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 269Get this manual

2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 269

CABLE ROUTING 1 Wire harness Ensure this is not kink3 50 mm (1.97 in) Make sure that the oil tank cap and oil tank breather
tank breather hose and wire harness at the inside of the instrument panel screw with plastic band; Route the tailbrake light
lead between the fuel tank and the snowmobile bodyMake sure that the fuel tank does not crush the tailbrake light leadThen,
fasten the three pieces of adhesive tape below the fuel tank as shownA Adhesive tapes To the tailbrake light Pass the wire
harness and fuel tank breather hose through the cable holderD Fuel sender coupler Install the metal clip facing downwardF