2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 296Get this manual

2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 296

COOLING SYSTEM INSP ADJ Inspection steps: Attach the cooling system tester to the coolant filler Cooling system tester: 90890-01325,
exchangerS While slowly adding coolant to the coolant filler, drain the coolant until no more air bubbles appearS Tighten
the bleed bolt Bleed bolt: 12.5 Nm (1.3 mSkg, 9.4 ftSlb) Add coolant to the coolant cold level Loosen the bleed bolt Drain
the coolant until no more air bubbles appearS Tighten the bleed bolt Bleed bolt: 3.5 Nm (0.4 mSkg, 2.9 ftSlb) Install the