2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 303Get this manual

2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 303

ENGAGEMENT SPEED CHECK TRACK TENSION ADJUSTMENT INSP ADJ ENGAGEMENT SPEED CHECK 1Place the machine on level surface of hardpacked
when the engine is runningS When the rear of the machine is raised to allow the track to spin, suitable stand must be used
to support the rear of the machineNever allow anyone to hold the rear of the machine off the ground to allow the track to
spinNever allow anyone near rotating trackS Inspect the condition of the track frequentlyReplace the track if it is damaged
to level where the fabric reinforcement material is visibleS Never install studs (cleats) closer than 76 mm (3 in) to the
edge of the track1Lift the rear of the machine onto suitable stand to raise the track off the ground2Measure: Track deflection