2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 367Get this manual

2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 367

CYLINDER HEAD AND CYLINDER INSPECTION 1Measure: Piston-to-cylinder clearance Measurement steps: 1st step: Measure the cylinder
in) Wear limit 69.100 mm (2.7205 in) 0.05 mm (0.002 in) 0.01 mm (0.0004 in) CMaximum(Maximum of D1 or D2) (Maximum of D5
or D6)(Maximum of D1, D3 or D5) (Minimum of D2, D4 or D6) S If out of specification, replace cylinder, and replace piston
and piston rings as set2nd step: Measure the piston skirt diameter (P) with micrometera 10 mm (0.39 in) from the bottom edge