2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 495Get this manual

2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 495

CABLE ROUTING 1 Clamp the fuel hose using the frame directly attached clamp2 Clamp the oil hose using the frame directly
and panel without being caught and secure the lead in the groove of fuel tank bottom surface using the adhesive tape (at
positions)9 To tail light unit 50 mm (1.97 in) Adhesive tape Pass the fuel tank breather hose through the holderC Variable
resistor coupler Attach the clip with its pawl directed downwardE Insert the fuel tank breather hose to the endF Compression
spring Ground lead Attach the hexagon bolt to the Y.P.V.SbracketI Fuel sender coupler Oil level gauge coupler Frame directly
attached clamp Fuel hose Pulser hose Oil delivery hose Headlight relay (dimmer) (black) Load control relay (white) Situate