2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 519Get this manual

2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 519

COOLING SYSTEM CAUTION: INSP ADJ S Hard water or salt water is harmful to engine partsIf soft water is not available, use
filler Cooling system tester: 90890-01325, YU-24460-01 Apply 100 kPa (1.0 kgcm2, 14 psi)S Measure the pressure with the gauge
Air bleeding 1Remove: Seat Rear bumper cover 2Bleed air from the cooling system Air bleeding steps: Lift up the tail of the
machineS Remove the bleed bolt on the heat exchangerS While slowly adding coolant to the coolant filler, drain the coolant