2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 593Get this manual

2002-2006 Yamaha SX Viper 700 Series Snowmobile Service Manual, Page 593

TIGHTENING TORQUE POWER TRAIN Parts to be tightened Primary sheave (1st) Primary sheave (2nd) Spider and sliding sheave Primary
Slide rail suspension mounting bolt (M10) Rear pivot arm and rear pivot arm bracket Shock absorber and rear pivot arm Rear
pivot arm and pull rod Rear suspension bracket and pull rod Shock absorber and rear suspension bracket Control rod and sliding
frame Tightening torque Nm 120 60 200 14 19 64 6.5 23 10 60 24 48 48 16 24 10 13 10 48 30 30 8.5 23 16 24 48 30 72 72 72
75 72 24 49 49 49 49 72 32 49 49 72 72 24 16 mSkg 12.0 6.0 20.0 1.4 0.6 1.9 6.4 0.4 0.65 2.3 1.0 6.0 2.4 4.8 4.8 1.6 2.4
1.0 1.3 1.0 4.8 0.6 3.0 3.0 0.85 2.3 0.4 1.6 2.4 4.8 3.0 7.2 7.2 7.2 7.5 7.2 2.4 4.9 4.9 4.9 4.9 7.2 3.2 4.9 4.9 7.2 7.2
2.4 1.6 ftSlb 85 43 145 10 4.3 13 46 2.9 4.6 17 7.2 43 17 35 35 11 17 7.2 9.4 7.2 35 4.3 22 22 6.1 17 2.9 11 17 35 22 52
52 52 54 52 17 35 35 35 35 52 23 35 35 52 52 17 11 Remarks Tighten the bolts in two stagesSee NOTELeft-hand thread Apply
LOCTITE (VT70J) (VT70J) Apply LOCTITE (VT70J) Apply LOCTITE Apply LOCTITE Apply LOCTITE Apply LOCTITE Apply LOCTITE Apply