2003-2006 Yamaha Snowmobile RX1 Service Manual, Page 217Get this manual

2003-2006 Yamaha Snowmobile RX1 Service Manual, Page 217

CRANKCASE 8Align: Bolt heads (with the connecting rod caps) 9Tighten: Connecting rod nuts Nut (connecting rod): 20 Nm (2.0
Tighten the connecting rod nutsS Put mark on the corner of the connecting rod nut and the connecting rod Tighten the nut
further to reach the specified angle (120_) WARNING When the nut is tightened more than the specified angle, do not loosen
the nut and then retighten itReplace the bolt with new one and perform the procedure again CAUTION: S Do not use torque wrench