2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 23Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 23

COOLING SYSTEM 2 1 INSP ADJ 14Inspect: Cooling system Decrease of pressure (leaks) Repair as requiredInspection steps: Attach
YU-33984 Apply 100 kPa (1.0 kgcm2, 14 psi) Measure the pressure with the gauge Air bleeding 1Remove: Rear bumper cover 2Bleed
air from the cooling system Air bleeding steps: Lift up the tail of the machine Remove the bleed bolt on the heat exchanger