2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 29Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 29

VALVE CLEARANCE ADJUSTMENT INSP ADJ Install the new valve pad and the valve lifter 2 Apply molybdenum disulfide oil to the
and camshaft cap bolts Align the camshaft marks with the camshaft cap marks Rotate the crankshaft clockwise several turns
to seat the parts Measure the valve clearance again If the valve clearance is still out of specification, repeat all of the
valve clearance adjustment steps until the specified clearance is obtained9Install: Crankshaft end accessing screw Timing
mark accessing screw 10Install: Cylinder head cover Refer to "CAMSHAFTS" in CHAPTER 511Install: All removed parts For installation,