2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 31Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 31

CARBURETOR SYNCHRONIZATION ENGINE IDLE SPEED ADJUSTMENT INSP ADJ Adjustment steps: Synchronize carburetor #3 to carburetor
(0.01 kgcm2, 0.19 psi)7Measure: Engine idle speed Out of specification AdjustMake sure that the vacuum pressure is within
specification8Stop the engine and remove the measuring equipment9Adjust: Throttle cable free play Refer to "THROTTLE CABLE
FREE PLAY ADJUSTMENT" ENGINE IDLE SPEED ADJUSTMENT NOTE: Prior to adjusting the engine idling speed, the carburetor synchronization
should be adjusted properly, the air filter should be clean, and the engine should have adequate compression1Start the engine
and let it warm up for several minutes2Install: Engine tachometer (near the spark plug) Engine tachometer: 90793-80009, YU-08036-C