2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 44Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 44

DRIVE V-BELT DRIVE V-BELT INSP ADJ WARNING When installing the new V-belt, make sure that it is positioned from 1.5 mm (0.06
position by removing or adding spacer on each adjusting bolt 2 CAUTION: As the V-belt wears, adjustment may be necessaryTo
ensure proper clutch performance, the V-belt position should be adjusted by adding spacer on each adjusting bolt when the
V-belt position reaches 1.5 mm (0.06 in) below the edgeNew belt width: 34.5 mm (1.36 in) Belt wear limit width: 32.5 mm (1.28