2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 45Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 45

DRIVE V-BELT INSP ADJ Adjustment Remove spacer 2Adjust the position of the V-belt by removing or adding spacer on each adjusting
bolt: 10 Nm (1.0 kg, 7.2 ft lb) Not necessary (It is correct Add spacer Thickness 0.5 mm (0.02 in) 1.0 mm (0.04 in) 4Inspect:
Drive V-belt Cracksdamagewear ReplaceOil or grease on the V-belt Check the primary and secondary sheaves 5Inspect: Primary