2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 49Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 49

AIR BLEEDING (HYDRAULIC BRAKE SYSTEM) INSP ADJ AIR BLEEDING (HYDRAULIC BRAKE SYSTEM) WARNING Bleed the brake system in the
caliper bleed screws 2dPlace the other ends of the hoses in containereSlowly apply the brake lever several timesfPull the
lever in, then hold the lever in positiongLoosen the bleed screws and allow the brake lever to travel towards its limithTighten
the bleed screws when the brake lever limit has been reached, then release the leveriRepeat steps (e) to (h) until all of
the air bubbles have disappeared from the fluidjTighten the bleed screwsBleed screw: Nm (0.6 kg, 4.3 ft lb) If bleeding is
difficult, it may be necessary to let the brake fluid settle for few hoursRepeat the bleeding procedure when the tiny bubbles