2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 97Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 97

REAR SUSPENSION INSP ADJ Rear suspension full rate (RSG90) 1Adjust: Full rate adjuster Adjustment steps: Installation position
desired position CAUTION: Be sure the adjusting bolt ends are set at the same position on each side While holding the adjusting
bolt securely, tighten the nut 1Shock absorber nut: 49 Nm (4.9 kg, 35 ft lb) CAUTION: Never allow the adjusting bolt to move
while tightening the nut This model has "Easy adjust" system for the Full rate adjusterThe bolt has teeth on itSo when the
bolt is turned, it rides up and down the bracket The nut has to be loosen first, while the bolt is held in place with wrench