2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 137Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 137

SECONDARY SHEAVE Adjustment steps: Disassemble the secondary sheave Remove the bolts and original shims Install new shims
Thickness 0.5 mm (0.02 in) 1.0 mm (0.04 in) INSTALLATION 1Lubricate: Splines (fixed sheave) Recommended grease: ESSO beacon
325 grease or Aeroshell grease #7A 2Tighten: Secondary sheave bolt Secondary sheave bolt: 64 Nm (6.4 kg, 46 ft lb) 3Adjust:
V-belt position Refer to "DRIVE V-BELT" in CHAPTER Sheave offset Secondary sheave free play (clearance) Refer to "SHEAVE