2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 154Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 154

SECONDARY SHAFT SECONDARY SHAFT AND DRIVE CHAIN HOUSING INSTALLATION 1Install: Secondary shaft Drive chain housing Installation
kg, 65 ft lb) Install the drive chain housing cover Properly install the rubber seal onto the drive chain housing, making
sure that these are no gaps Tighten the bolts 4Drive chain housing cover: 48 Nm (4.8 kg, 35 ft lb) Tighten the bolts 5Drive
chain housing cover bolt: 24 Nm (2.4 kg, 17 ft lb) Install the collar Tighten the collar set screw 6Collar set screw: Nm