2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 258Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 258

CRANKCASE ENG 8Straighten the lock washer tab9Loosen: Balance weight bolts 1 Place piece of wood between the balancer and
rings as set 2Measure: Piston-to-cylinder clearance Measurement steps: 1st step: Measure cylinder bore "C" with the cylinder
bore gauge 1 Measure cylinder bore "C" by taking side-to-side and front-to-back measurements of the cylinderThen, find the
average of the measurementsCylinder bore "C" Taper limit "T" Out of round "R" 79.00079.010 mm (3.11023.1106 in) 0.050 mm