2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 262Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 262

CRANKCASE 11Inspect: Crankshaft journal surfaces Crankshaft pin surfaces Bearing surfaces Scratcheswear Replace the crankshaft12Measure:
bearings must be installed in their original positions Clean the crankshaft journal bearings, crankshaft journals, and bearing
portions of the crankcase Place the upper crankcase upside down on bench Install the crankshaft journal upper bearings and
the crankshaft into the upper crankcase Align the projections of the crankshaft journal upper bearings with the notches in
the crankcase Put piece of Plastigauge on each crankshaft journal Do not put the Plastigauge over the oil hole in the crankshaft