2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 316Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 316

ELECTRICAL STARTING SYSTEM Inspection 1Inspect: Commutator (outer surface) Dirty Clean with #600 grit sandpaper 1Hold the
Out of specification Scrape mica to proper limitsUse hacksaw blade that is ground to fitMica undercut: 1.5 mm (0.059 in)
4Measure: Armature coil resistance (insulationcontinuity) Defect(s) Replace the starter motorInspecting steps: Connect the
pocket tester for the continuity check and the insulation check Measure the armature coil resistancesArmature coil resistance:
Continuity check: 0.0080.010 at 20 (68 F) Insulation check: More than 100 at 20 (68 F) If the resistance is incorrect, replace