2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 474Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 474

SECONDARY SHAFT 5Install: Secondary shaft slideholder 1 This procedure does not require the use of the collar included with
only with the inner race of the bearingSecondary shaft slideholder: 90890-01492, YS-01492 6Tighten: Bearing collar nut Ring
nut wrench: 90890-01268, YU-01268 Bearing collar nut: 55 Nm (5.5 kg, 40 ft lb) Install the ring nut wrench and then tighten