2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 475Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 475

SECONDARY SHAFT SECONDARY SHAFT AND DRIVE CHAIN HOUSING INSTALLATION 1Install: Secondary shaft Drive chain housing Installation
kg, 65 ft lb) Install the drive chain housing cover Properly install the rubber seal onto the drive chain housing, making
sure that these are no gaps Tighten the bolt 4Drive sprocket bolt: 48 Nm (4.8 kg, 35 ft lb) Tighten the bolts 5Drive chain
housing cover bolt: 43 Nm (4.3 kg, 31 ft lb) Tighten the bolts 6Drive chain housing cover bolt: 24 Nm (2.4 kg, 17 ft lb)