2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 531Get this manual

2006-2008 Yamaha RS, Vector, Rage Factory Service Manual, Page 531

TIGHTENING TORQUE Parts to be tightened Control rod shaft and sliding frame Rear pivot arm bracket and sliding frame Rear
kg ft lb 7.2 52 (RS90NRS90NRRS90RS RS90MS) 7.2 52 (RS90GT) Apply LOCTITE 7.5 54 0.9 6.5 Apply LOCTITE 2.0 14 2.0 14 4.0 29
: ESSO beacon 325 grease or Aeroshell grease #7A Tightening steps: 1Tighten the bolt to torque at 120 Nm (12.0 kg, 85 ft