2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 29Get this manual

2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 29

VALVE CLEARANCE ADJUSTMENT INSP ADJ Install the new valve pad and the valve lifter 2 Apply molybdenum disulfide oil to the
camshaft cap bolts Align the camshaft marks with the camshaft cap marks Rotate the crankshaft counterclockwise several turns
to seat the parts Measure the valve clearance again If the valve clearance is still out of specification, repeat all of the
valve clearance adjustment steps until the specified clearance is obtained7Install: Crankshaft end accessing screw Timing
mark accessing screw 8Install: Cylinder head cover Refer to "CAMSHAFTS" in CHAPTER 59Install: All removed parts For installation,