2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 238Get this manual

2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 238

CRANKCASE Measurement steps: CAUTION: Do not interchange the big end bearings and connecting rodsTo obtain the correct crankshaft-pin-to-big-end-bearing
rod and the big end lower bearing into the connecting rod cap Align the projections on the big end bearings with the notches
in the connecting rod and connecting rod cap Put piece of Plastigauge on the crankshaft pin Assemble the connecting rod halves
Do not move the connecting rod or crankshaft until the clearance measurement has been completed Apply molybdenum disulfide