2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 257Get this manual

2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 257

WATER PUMP ASSEMBLY 1Install: Oil seal New (to the water pump housing) Before installing the oil seal, apply tap water or
onto the water pump seal surface Install the water pump seal with the mechanical seal installer and 40 and 50 mm bearing
driver Before installing the water pump seal, apply Yamaha bond No.1215 to the water pump housing 3Mechanical seal installer:
90890-04145, YM-04145 40 and 50 mm bearing driver: 90890-04058, YM-04058 Yamaha bond No1215: 90890-85505 (Three Bond No.1215)