2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 374Get this manual

2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 374

TIGHTENING TORQUE Parts to be tightened Bearing retainer Right balancer weight Connecting rod and cap A.Cmagneto rotor A.Cmagneto
engine oilApply LOCTITE Apply LOCTITE Apply LOCTITE Apply LOCTITE Apply LOCTITE 1: Tighten the cylinder head bolts to 25
Nm (2.5 kg, 18 ft lb) in the proper tightening sequence, loosen and retighten the cylinder head bolts to 25 Nm (2.5 kg, 18
ft lb) in the proper tightening sequence, and then tighten the cylinder head bolts further to reach the specified angle 175185
in the proper tightening sequence2: Tighten the crankcase bolts to 15 Nm (1.5 kg, 11 ft lb) in the proper tightening sequence,
loosen and retighten the crankcase bolts to 15 Nm (1.5 kg, 11 ft lb) in the proper tightening sequence, and then tighten
the crankcase bolts further to reach the specified angle 6570 in the proper tightening sequence3: Tighten the connecting