2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 435Get this manual

2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 435

AIR PRESSURE ADJUSTMENT (PZ50RT) Adjustment steps: INSP ADJ WARNING Support the snowmobile securely on suitable stand before
until the pressure registers on the pump gauge CAUTION: Do not overtighten the connector onto the air valve as this will
damage the connector seal If the shock absorber has no air pressure, the gauge reading will be zero5To increase the air pressure,
operate the pump few timesThe pressure should increase slowlyIf the pressure increases rapidly, check to make sure that the
pump is properly connected and tightened onto the air valveTo decrease the air pressure, push the black bleed valve button
3 To allow pressure to escape from the pump and the shock absorber, push the button halfway down and hold itTo allow only