2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 489Get this manual

2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 489

TIGHTENING TORQUE Parts to be tightened Balancer shaft driven gear Bearing retainer Connecting rod and cap A.Cmagneto rotor
LOCTITE Apply the engine oilApply LOCTITE Apply LOCTITE Apply LOCTITE Apply LOCTITE Apply LOCTITE 1: Tighten the cylinder
head bolts to 25 Nm (2.5 kg, 18 ft lb) in the proper tightening sequence, loosen and retighten the cylinder head bolts to
25 Nm (2.5 kg, 18 ft lb) in the proper tightening sequence, and then tighten the cylinder head bolts further to reach the
specified angle 175185 in the proper tightening sequence2: Tighten the crankcase bolts to 15 Nm (1.5 kg, 11 ft lb) in the
proper tightening sequence, loosen and retighten the crankcase bolts to 15 Nm (1.5 kg, 11 ft lb) in the proper tightening
sequence, and then tighten the crankcase bolts further to reach the specified angle 6570 in the proper tightening sequence3: