2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 491Get this manual

2007-2008 Yamaha Phazer Venture-Lite 500 Factory Service Manual, Page 491

TIGHTENING TORQUE Parts to be tightened Front pivot arm and connecting arm Front pivot arm and sliding frame Front suspension
holder (front axle) Speed sensor Bearing housing Gear unit (speed sensor) Tightening torque Nm 72 60 72 72 60 60 49 49 60
49 49 60 35 72 72 60 60 60 25 72 75 24 24 24 24 40 Remarks kg ft lb 7.2 52 (PZ50VTPZ50MP) 6.0 43 7.2 52 7.2 52 Apply LOCTITE
(PZ50MT) 6.0 43 6.0 43 0.6 4.3 4.9 35 (PZ50PZ50GTPZ50RTPZ50MT) 4.9 35 (PZ50VTPZ50MP) 6.0 4.9 4.9 6.0 0.9 3.5 7.2 7.2 6.0
6.0 6.0 2.5 7.2 7.5 0.9 2.4 2.4 2.4 2.4 4.0 43 35 35 43 6.5 25 52 52 43 43 43 18 52 54 6.5 17 17 17 17 29 (PZ50VTPZ50MP)
(PZ50VTPZ50MP) (PZ50VTPZ50MP) (PZ50VTPZ50MP) (PZ50PZ50GTPZ50RTPZ50MT) Apply LOCTITE (PZ50PZ50GTPZ50RTPZ50MT) Apply LOCTITE
(PZ50PZ50GTPZ50RTPZ50MT) (PZ50PZ50GTPZ50RTPZ50MT) (PZ50MT) (PZ50VTPZ50MP) (PZ50VTPZ50MP) (PZ50VTPZ50MP) Apply LOCTITE Inside
Apply LOCTITE Outside Tightening steps: 1Tighten the bolt to torque at 120 Nm (12.0 kg, 85 ft lb)2Loosen the bolt completely3Retighten