2007 Yamaha Apex Factory Service Manual, Page 59Get this manual

2007 Yamaha Apex Factory Service Manual, Page 59

HEADLIGHT BEAM ADJUSTMENT INSP ADJ HEADLIGHT BEAM ADJUSTMENT 1Place the machine on level surface2Place the machine in front
let it idle5Switch on the headlight's high beam and check the height of the projected beam on the wallThe projection should
be at the position marked in step or 12_ lower (set range )D S ELECTRICAL 3.0 (10 ft) 26 mm (1.0 in) SSet range 7.6 (25 ft)
66 mm (2.6 in) DDistance 6Adjust: Headlight beam (vertically) Vertical adjustment Higher Turn the adjusting screw clockwiseLower