2007 Yamaha Apex Factory Service Manual, Page 120Get this manual

2007 Yamaha Apex Factory Service Manual, Page 120

SECONDARY SHEAVE Installation steps: Hold the spring seat and turn the fixed sheave counterclockwise to the specified angle
come through the holesS While pushing down on the spring seat, install the nuts and tighten them to the specified torqueNut
(spring seat): 23 Nm (2.3 mSkg, 17 ftSlb) 4Measure: Secondary sheave clearance Out of specificationAdjustSecondary sheave
clearance: 35.0 35.8 mm (1.38 1.41 in) 5Calculate: Shim thickness NOTE: For example, if the clearance is 36 mm (1.42 in),