2007 Yamaha Apex Factory Service Manual, Page 230Get this manual

2007 Yamaha Apex Factory Service Manual, Page 230

WATER PUMP NOTE: Install the water pump seal with the water pump seal installers Before installing the water pump seal, apply
NOTE: Before installing the rubber damper, apply tap water or coolant onto its outer surface5Measure: impeller shaft tilt
Out of specificationRepeat steps (4) and (5) CAUTION: Make sure the rubber damper and rubber damper holder are flush with
the impellerMaximpeller shaft tilt: 0.15 mm (0.0059 in) Limit: 0.072 mm (0.0028 in) 1 Straightedge Impeller http:ReadManm